Helmets

Armour from Netbook of Armor
Helmets

The Roman helmet was made of metal, and included a brim, cheek guards, and a neck guard. The earlier Greek design was an elongated bronze dome with a ‘T’ in the front, with two ‘o’ shapes replacing the bars of the ‘T’. Saxons merely wore a leather cap, but the Normans wore an upturned metal bowl with nose guard. Viking warriors used a similar design, but with metal encircling the eye sockets and often with mail hanging from the front to enclose the mouth and nose. This latter cannot have been very effective, as it was not backed by the body but hung in space.

With the full mail suit came other helmets. The flat-topped great helm was a metal cylinder with a flat top (hence the name), with a slit for the eyes and strengthening bars to protect the nose and eye areas from caving in. The round-topped kettle hat, a hemisphere with a brim, was also used in this period, as was the round helmet or skull cap (simply an upturned metal bowl) and the flat-topped helm, looking like an inverted saucepan minus handle. These were available with and without nasal bar.

The classic great helm continued into the 14th Century before it’s replacement. It was heavy and rested upon the shoulders. It did not change functionality from it’s first days, merely adding features such as ventilation holes and different shapes. In the second half of the 14th Century a new type of helmet emerged, the bascinet (for that is how it is spelt). Initially, it was worn over a mail coif, but this soon evolved into mail attached to the rim of the helmet. It was at first similar to the Norman design, but extended over the ears and the back of the head. The only exposed area was the face, and this was remedied with the development of the visor. Initially, these were merely slightly rounded plates with eye slits, but the evolved into rounded shapes with ventilation holes, and pointed, beaked variants as well. At first, in the days of the visorless bascinet, the great helm would be worn over the top but when the bascinet developed it’s own visor this practice was abandoned. Early visors were hinged at the top, but later designs hinged on both sides, complete with pivot and removable hinge pin so that the bascinet

In the 15th Century, the popular bascinet came to lose the mail extensions and these were replaced with plate. At the back, the helmet now came down further and extended over the back armour, offering complete protection for the back of the neck. It was now attached to the breast and back plates by means of straps and buckles. The barbut was another type of helmet developed in this century, looking very much like early Greek designs. It covered the head, the back of the neck and the cheeks, leaving an opening for the face. As this style developed, the holes got smaller and smaller, and more fitted to the shape of the mouth and eyes they exposed. By 1500, this type was no longer in use, having been replaced by the sallet. Early models of this helmet were similar to the barbut but were more rounded and fitted much closer around the neck. Later sallets consisted of a rounded skull-piece, roughly hemispherical, that tapered towards the back to form a neck guard, which could be simple or laminated in construction. The sallet covered the face to just below the nose, and included an eye-slit. Some sallets were fitted with visors, failing that, a bevor was fitted to protect the lower face. German designs had more pointed neck guards, but Italian sallets were more similar to the barbut in design and appearance. In the last part of the 15th Century the armet appeared as well as these types. It had a skull-piece and a long vertical ridge at the rear to protect the neck. Hinged cheek pieces could be strapped together when the helmet was worn, much like the Roman helmet save that the Roman hinges were located between the tops of the ears and the eyes, and the hinges of the armet were placed below and behind the earlobes. A raiseable visor was fitted to protect the joins and straps at the front. For additional protection a metal wrapper was sometimes attached as well, and to protect the straps of the wrapper itself a circular plate, the rondel, was also fitted.

The 16th Century saw the emergence of the close-helmet, a design similar to the armet but lacking the hinged cheek-guards. A gorget plate at the base of the helmet was attached to the gorget of the breastplate. Initially this design had a low comb or crest, which grew in size until it reached the heights of the Italian combed morion in use about 1590. After this, the comb shrank again, along with the visor which became less exaggerated. Another design of helmet in this period was the burgonet, with an open face and a central comb. The face would be guarded by bars, but most of the face would be visible, as opposed to earlier designs in which there were only eye-slits. Developed from this design was the morion, the distinctive helmet of the Spanish Conquistador. Italian morions usually featured a comb, Spanish designs were plainer and had a simple domed top. This design would be continued until the 17th Century, with simple helmets covering only the top of the head and the back of the neck, sometimes incorporating cheek-guards.

As the standard PHB descriptions of helmets are too brief and inaccurate, I have made listings for all the types of helmet below, under New Armour Types. I suggest that the standard PHB descriptions and statistics be ignored. Helmets add nothing to armour class as it is assumed that they would be worn with armour where appropriate. Combining a helmet with padded armour would be pointless and thus adds nothing, similarly, field plate is designed with helmets in mind and so it is unnecessary to add anything for the helmet. DMs may wish to penalise the ACs of players who insist on wearing heavy armour without an appropriate helmet, especially where called shots to the head are involved.

All 1889 items in the Netbook Treasury